|
Welcome to my jewelry portfolio with a dozen original
designs for purchase that I supply to many fine art galleries nationwide.
|
|||||
|
|
|||||
![]() |
The Butterfly design is assembled with 19-gauge Byzantine chain to create the four wings that are embellished with two circular settings of gemstone beads. The Butterfly pendant is completed with a choice of red or blue paracord, tied with four overhand knots into an adjustable length, and secured with wire wrapped terminations.
|
||||
![]() |
![]() |
![]() |
|||
|
Make your own Butterfly pendant, instructional jewelry kits are available
at the 3rd book kits page.
|
|||||
![]() |
The Aries design is created with 10-gauge silver wire that has been milled, soldered, and assembled into an equally spaced three-ring spiraling formation. The Aries pendant is completed with two yards of black paracord, tied with four overhand knots into an adjustable length, and secured with wire wrapped terminations. |
||||
![]() |
![]() |
![]() |
|||
| |
|||||
![]() |
The Incan Triangle design is assembled with three sizes of silver jump rings into a triangular pattern, which is embellished with two sizes of gemstone beads, as featured in the 3rd book. Customer choice of paracord color (red or black), choice of gemstone beads (red carnelian and/or black onyx), and optional patina treatment. |
||||
![]() |
![]() |
![]() |
|||
| Make
your own Incan Triangle pendant, instructional jewelry kits are available
at the 3rd book kits page.
|
|||||
![]() |
The Ohm design is created with 12-gauge silver wire
that has been milled, soldered, and assembled into an equally spaced
five-ring spiraling formation. The Ohm pendant is completed with
two yards of black paracord, tied with four overhand knots into
an adjustable length, and secured with wire-wrapped terminations.
|
||||
![]() |
![]() |
![]() |
|||
|
|
|||||
![]() |
The Fish design is assembled with seven sizes of silver
jump rings into an organic pattern, which is embellished with two
sizes of gemstone beads, as featured in the 3rd
book. Customer choice of paracord color (red or black), choice
of gemstone beads (red carnelian or black onyx), and optional patina
darkening treatment. |
||||
![]() |
![]() |
![]() |
|||
| Make
your own Fish pendant, instructional jewelry kits are available at
the 3rd book kits page.
|
|||||
![]() |
The Dharma Wheel is assembled with six silver rings
that are soldered within a larger frame and hammer forged into an
equally spaced six-ring spiraling formation. Customer choice of
blue or black paracord, set with a length adjustment ring, tied
with a reef knot, and secured with wire-wrapped terminations. |
||||
![]() |
![]() |
![]() |
|||
|
|
|||||
![]() |
The Tornado design starts by torch-heating 19-gauge
Argentium silver wires into headpins to be embellished with a fine
gold wire wrapped gemstone beads in the applied motion of a wind
whirling tornado vortex, as featured in my 2nd
book. Customer has the gemstone choice of red carnelian, purple
amethyst, or blue quartz. |
||||
![]() |
![]() |
![]() |
|||
|
|
|||||
![]() |
The Money design starts by torch-heating 16-gauge
Argentium silver wires into headpins to be secured with a rolled dollar
bill, showing the pyramid with floating eye motif. Smaller 19-gauge
headpins are handbent into earring backs to suspend these rolled bills
as they dust the shoulders; as featured in the 4th
book.
|
||||
![]() |
![]() |
![]() |
|||
|
|
|||||
![]() |
The Propeller design, from my upcoming 5th
book, starts with three rings soldered into a gravity-defying
spiral pattern, set with two sizes of gemstone beads with a fine
wire wrapping, and completed with handbent earring backs. Customize
with color mix of red carnelian, green chrysoprase, dark blue lapis
lazuli and light blue turquoise. |
||||
![]() |
![]() |
![]() |
|||
|
|
|||||
![]() |
The Aries design is crafted from either Argentium
sterling silver or 14/20 gold-filled wire that has been milled,
soldered, and assembled with three precisely-sized connector rings
into an equally spaced three-ring spiraling formations. This eye-catching
design is finished with a pair of handbent 19-gauge earring backs
to dangle in style. |
||||
![]() |
![]() |
![]() |
|||
|
|
|||||
![]() |
The Tripoli design is assembled with three sizes of
silver jump rings into a three-pointed pattern, with a floating
ring at each termination. The Tripoli formation is embellished with
three faceted gemstone beads, with customer choice of red carnelian,
purple amethyst, or burgundy garnet beads, and completed with custom
earring backs. |
||||
![]() |
![]() |
![]() |
|||
|
|
|||||
![]() |
The Chaos design starts with a length of 14-gauge
gold wire that is wrapped with a finer 24-gauge gold wire and embellished
with red carnelian and black onyx beads, as featured in the 2nd
book. The wire-wrapped pattern is then completed at both ends
with a series of gold spiraling rings, and a pair of handbent earring
back. |
||||
![]() |
![]() |
![]() |
|||
| |
|||||
| Below is a listing of my older jewelry portfolio, although I am not listing prices, they can be commissioned by email. This collection represents my ongoing research in refining my style in jewelry design, click on any of the thumbnails to view larger images and details |
|||||
| |
|||||